2
Introduction
Power Master Battery Charger is small and lightweight charger that offers charging
patterns which are perfectly adapted to each battery technology (liquid electrolyte,
gel
electrolyte, lead calcium, etc... ). A
charging pattern may be factory set to suit your
specific application.
To prolong the life of your batteries and conserve their initial
capacity, the charger is programmed
with 5
three-state charging patterns:
z
BOOST Charge/FAST Charge
:Restores battery capacity until 80 % in a short
space of time.
z
ABSORPTION Charge/BALANCE Charge
: Complements of charge until 100 %
of battery capacity
z
FLOATING Charge/TOP-UP Charge :
Compensates for constant battery drain,
while keeping the battery fully charged.
Power Master Battery Charger
is the only charger on the market to allow the battery to
be connected and used
constantly, while still offering a
real BOOST (high voltage)
charge over short period. The
charger switches back to top-up mode automatically.
In accordance with EC standards, the Power Master Battery charger is fitted with a PFC
(Power Factor Corrector) which limit peak current draw from the input power required
from the generator or Mains supply to be reduced.
Technical Features
-
Management and control by
microprocessor
-
Charging curve of 3 states IUU type
- UNIVERSAL input voltage 90V to 250Vac
(item 12V/40A, 12V/60A, 24V/30A,
24V/50A)
- Input voltage 230V ~ +10%/-15%
(item 12V/20A, 24V/15A )
- Frequency 50/60Hz
- Output voltage Ubat
±
1% ; output current Ibat
±
10%
- Operating temperature -10 to + 45°C; storage temperature -20 to +70°C
- Charging curve selection by rotate switch for 5 different batteries types
- Sensor used to balance charging voltage according to temperature gaps (-27mV/°C)
- Automatic air vented cooling
- Protection Index IP 235
