11
6.
Turn on the power to the machine.
7.
Start the sanding belt.
8.
Start the feeding conveyor.
NOTE: If you are sanding a workpiece greater than
16 inches, pull out the support extension, and
tighten the wing nuts. After the first pass, the
workpiece can be spun around and fed back through
the machine, for a maximum sanding width of 32
inches.
OPTIONAL ACCESSORIES
6293307
Sanding Belt, 17" x 54" – 60 Grit
6293308
Sanding Belt, 17" x 54" – 80 Grit
6293309
Sanding Belt, 17" x 54" – 100 Grit
6293310
Sanding Belt, 17" x 54" – 120 Grit
Summary of Contents for 1632
