2
Repair or replace damaged or worn cord immediately.
This tool is for use on a nominal 120-V circuit, and has a
grounded plug that looks like the plug illustrated in sketch
A in Figure 2. A temporary adaptor that looks like the
adaptor illustrated in sketches B and C may be used to
connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available.
Figure 2: plug configuration
The temporary adaptor should be used only until a properly
grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like
extending from the adaptor must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must be held in
place by a metal screw.
In Canada, the use of a temporary adaptor is not permitted
by the Canadian Electrical Code, C22.1.
Service parts
Part no.
Description
Qty.
6294924-01
DC power driver (located in lamp base)
1
TS-1506011
Socket head cap screw, M12-1.5x20 *
2
JWTS-182
Phillips pan head machine screw, M4x15 *
4
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST.
Having the Model Number and Serial Number of your product available when you call will allow us to serve you quickly and
accurately.
* Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from Powermatic.
