background image

 

POWERMATIC PM1900 Dust Collector 

 
The POWERMATIC 
PM1900 is designed with the 
power to work with planers, 
wide belt sanders and most 
woodworking machines. Its 
powerful dust-evacuating 
suction, effective filtering, 
multiple connection and 
large collection capacity 
make the POWERMATIC 
PM1900 a capable central 
dust collection system for the 
whole shop. Plus, it packs 
those capabilities into a 
durable, space-saving 
package that accommodates 
virtually any shop size and 
needs. 
 
The POWERMATIC 
PM1900 is shipped as a bare 
machine without filter elements or catch bags allowing the buyer to “design” the system they 
want. The fabric filter and catch bag sets as well as the pleated canister filters with five plastic 
catch bags are sold as individual kits. This allows the purchaser to save money by getting the 
POWERMATIC PM1900 with the filter style wanted without paying for and then discarding an 
unused “standard” filter and bag sets. 

The POWERMATIC DC1900 is essentially the same machine but can be equipped 

with the fabric style bags (left) or the canister kit. (right) The difference in height 

between the bag and canister setups can be important in some shop environments with 

low ceilings or other height restrictions. 

 

Filtering Efficiency 

 
The bag filter elements are 20

 in diameter and 48

 in length. Upright hooks are included to 

support the bags when the POWERMATIC PM1900 is not running. Spring steel band clamps 
secure the filter bags to the twin collector housings. The fabric collector bags use spring retaining 
rings sewn into their upper edges that fit into a groove in the collector housings making 
installation and removal tool free. Many manufacturers use an outside band for securing 
collection bags that can be very difficult to work with, especially when done alone. 
 
The bag type elements filters out 96% of 30 micron particles.  
 
The canister filters are 20

 in diameter and 29

 long. The canisters mount directly to the collector 

housings and seal with factory installed foam gaskets within the canister flanges. Four finger-
operated knobs lock each canister to the collector housings. Despite the canisters compact overall 
size, its pleated filter element has six times the filtering surface area of the fabric bag type. 
 

Summary of Contents for PM1900

Page 1: ... fabric style bags left or the canister kit right The difference in height between the bag and canister setups can be important in some shop environments with low ceilings or other height restrictions Filtering Efficiency The bag filter elements are 20 in diameter and 48 in length Upright hooks are included to support the bags when the POWERMATIC PM1900 is not running Spring steel band clamps secu...

Page 2: ... for both the fabric and plastic bags is 10 cubic feet Power and Control The POWERMATIC PM1900 is available in two configurations First is with a 3HP 1Ph 220V only TEFC totally enclosed fan cooled motor We also offer a version with a 3HP motor running on 3Ph 230 460V power wired for 230V from the factory POWERMATIC motors are rated using a continuous duty cycle rather than the peak or max develope...

Page 3: ... duty impeller has been optimized to both move large amounts of air and to maintain that volume consistently in a wide range of usage situations The impeller is specifically designed for maximum efficiency and consistency in the DC1900 The fan section develops 1 891 CFM cubic feet per minute of airflow at 8 of water Velocity also at 8 of water is 5 393 7 FPM feet per minute Static pressure is 12 1...

Page 4: ...ch collector housing Eliminating two legs at each collector housing creates substantially more unobstructed space that makes changing the collection bags much easier The collector housings are specially designed to create a cyclonic effect that helps separate particles from the air to enhance filtering and venting The swirl of air also helps distribute the dust evenly in the catch bag Mobility The...

Reviews: