background image

 

5

 

 
20. Make your workshop child proof with padlocks, master switches or by removing starter keys. 

21. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are 

careless acts that can result in serious injury. 

22. Do not use the dust collector for anything except wood dust. Materials such as liquids, metal 

shavings, metal dust, screws, glass, plastic or rock can cause sparks and/or damage when coming 
into contact with any part of the dust collector. 

23. Use recommended accessories; improper accessories may be hazardous. 

24. Maintain tools with care. Follow instructions for lubricating and changing accessories. 

25. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air to 

remove chips or debris — do not use your hands. 

26. Do not stand on the machine. Serious injury could occur if the machine tips over. 

 

 

Familiarize yourself with the following safety notices used in this manual: 

 

 This means that if precautions are not heeded, it may result in minor injury and/or 

possible machine damage. 
 

 This means that if precautions are not heeded, it may result in serious injury or possibly 

even death. 
 
 
 
 
 
 

- - SAVE THESE INSTRUCTIONS - - 

 

 

 
 

Summary of Contents for PM1900





















Reviews: