ast
ined
POWERMATIC PM201HH, 22" Planer
The POWERMATIC PM201HH, 22" Planer is a rock solid,
1300-LB cast iron and steel planer designed to be
accurate, productive and cost effective in the small to
medium shop environment for many years to come. User
friendly features like simple controls, a quick access
hinged top and 5”-diameter, top-mounted dust port make
the POWERMATIC PM201HH, 22" Planer easy to operate
and maintain. The high tech helical cutterhead is designed
to produce silky-smooth surfaces on the wood without
constant sharpening or cutter replacement.
The POWERMATIC PM201HH, 22" Planer is available in
three versions. The #1791267 201HH, 22" Planer comes
with a 7.5HP 1PH 230V motor. The #1791268 201HH, 22"
Planer also has a 7.5HP motor but runs on 3PH 230V
power. The #1791269 201HH, 22" Planer, has a
7.5HP motor that runs on 3PH 460V
for most industrial applications.
The Powermatic PM201HH Planer
is built to be tough, accurate and
easy to maintain in the shop
environment.
Helical Cutterhead
The POWERMATIC PM201HH, 22" Planer features the
innovative, 3-1/4”-diameter helical cutterhead equipped with
150, four-sided carbide inserts. These high-quality inserts
are designed for use with the 4800-RPM cutterhead speed
to produce a superior finish while dramatically reducing
sound levels as compared to conventional knife type
cutterheads. Because each insert has four identical cutting
edges, their useable life is greatly extended.
This four sided insert design also means maintenance is f
and easy. Each insert is installed on a precision-mach
seat that eliminates complicated setup, shimming or
alignment procedures. That drastically reduces costly
downtime. Plus, if a piece of metal is accidentally passed
through the POWERMATIC PM201HH, 22"
Planer, only the inserts directly in line with the
metal might have to be indexed or replaced. This
dramatically reduces replacement parts costs as
well as related downtime.
The sophisticated helical head
creates ultra-smooth surface
with far less cutter replacement
or maintenance than with
conventional knife systems.
The segmented feed rollers make working
with various thickness pieces safe and
consistent. The result is higher production
without sacrificing quality.
Smart Feed System
Anti-kickback fingers along the front edge of the
infeed side help prevent stock from being kicked
