Powermatic R100 Fitting Instruction Download

Page: 1 / 8

IF USING INTUMESCENT KIT R97-XX, REFER TO INSTRUCTIONS

WITH KIT AS INSTALLATION DEPTHS WILL INCREASE

PLEASE READ FITTING INSTRUCTIONS THOROUGHLY

BEFORE INSTALLATION

IMPORTANT NOTICE - FOR FIRE DOOR INSTALLATIONS

REFER TO ITEM 1 IN FITTING INSTRUCTIONS

•

UKCA marked

• CE marked and adjustable to conform to power size 3 of Controlled Door Closing

Device. BS EN1154: 1997 (Test door 60kg/132lbs).

• 1 Hour Fire Test BS EN1634-1: 2000.

• Adjustable speed control.

• Adjustable power latching action.

•

1 1/2 Pairs of hinges should be used in conjunction with this closer on all doors.

• Suitable for doors opening to a maximum of 105°. A door stop should be fitted.

• Maximum door weight 80kg/175lbs, width 950mm/38”.

• Suitable for latched and unlatched doors.

• Should

NOT

be used with rising butt hinges.

• For use with concealed hinges contact our Customer Service Team - details on

the back of this leaflet.

Summary of Contents for R100

Page 4: ...o more than 35mm 1 3 8 from the pivot point of the hinge IMPORTANT To ensure the 35mm 1 3 8 distance is not exceeded the closer and fixing plate can both be offset in the door leaf and jamb closer to the hinge pivot point by up to a maximum of 6mm 1 4 as illustrated below Fig 2 ...

Page 6: ...rally for thicker doors expose both holes on each rod Insert the Allen keys C through both top and bottom link rod holes Both Allen keys must be correctly located Remove extractor bolt Secure door plate to door with six screws D IMPORTANT With composite doors and door linings it is essential to drill pilot holes Ø 3 32 2 5mm to suit fixing screws ...

Page 7: ... link rods across door plate and offer frame plate into frame void Secure with six screws D Open door slightly and remove Allen keys Installation is now complete Remove dust cap Use one of the Allen keys C to adjust closing speed Positive increases door speed Negative reduces door speed as indicated on door plate ...