Powermatic WP2412, Operating Instructions And Parts Manual

6 

Introduction 

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures 
for a Model WP2412 Powermatic Planer. This manual contains instructions on installation, safety 
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine 
has been designed and constructed to provide years of trouble free operation if used in accordance with 
instructions set forth in this manual. If there are any questions or comments, please contact either your 
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: 
www.wmhtoolgroup.com. 

Description 

This multi-featured 15 horsepower planer is built for the rugged, industrial environment. It features a quick 
change Tersa

TM

 cutterhead with reversible knives, segmented infeed roller with sectional chip breaker, 

and dual drive chains and sprockets. The cutterhead and infeed and outfeed rollers have double 
bearings. The planer frame is built with heavy plate steel, and the cast iron table is supported by four 
massive columns – this machine will not vibrate under load. Knife changes are quick with the self-seating 
knives. The planer will accomodate rough to finish work, and multiple piece planing. 

Specifications 

Model Number ............................................................................................................................. WP2412 
Stock number .............................................................................................................................. 1791295 
Main motor (TEFC) .......................................................................................15HP, 3Ph, 230V, 60Hz, 60A 
Table raising motor (TEFC)........................................................................................................... .0.75HP 
Feed Motor (TEFC)............................................................................................................................. 1HP  
Variable feed speed (ft/min.) ......................................................................................................... 16 to 72 

Cutterhead speed (RPM) .......................................................................................................... 5200 RPM 

Cutterhead diameter (in) ..................................................................................................................... 4.75  
Knives TERSA

TM

 (in)................................................................................................................. four @ 25”  

Max. chip removal single pass (in) .................................................................................................. 0.3125  
Serrated infeed roller (in) .................................................................................................................... 2.75  
Outfeed rollers (in) .............................................................................................................................. 2.75  
Table dimensions (in)................................................................................................................24.8 x 45.6 

Thickness capacity (in) .......................................................................................................................... 12  
Dust port (in)............................................................................................................................................ 6  
Belts ...................................................................................................................................... three V-belts 

Overall dimensions (in LxWxH) ............................................................................................... 58 x 48 x 43 

Overall dimensions (crated) (in LxWxH) .................................................................................. 63 x 53 x 49 

Net weight (lbs)................................................................................................................................. 2,310  
Shipping weight (lbs)......................................................................................................................... 2,640 

The above specifications were current at the time this manual was published, but because of our policy of 
continuous improvement, WHM Tool Group reserves the right to change specifications at any time and 
without prior notice, without incurring obligations.