21
2．8 Inspection of oil filter
Cleaning of lubricator oil strainer: remove
clarifier
(Figure 2-17)
,
clean it to ensure a well work- condition. Then
fix it up.
Note: Clean the clarifier
Before injecting oil
Into crankcase.
Figure 2-17
2.9 Inspection of lubrication system
Lubricant of engine: the vehicle is oiled with lubricant
of APISGSAE10W/40. Others are forbidden.
Capacity:
1. The capacity is 1.9L after disassembly and assembly.
2、The capacity is 1.8L when fueling up after drain.
Inspection of lubricant: locate the dune buggy on the
ground to look over the capacity with dip stick. If the level
is lower than the bottom indicator, fuel up with recommended
lubricant to the upper indicator.
Inspection of oil pump:
Flow of oil pump:
