53
1、Inspect the drive of the gear whether angle.
If it is not agile, dismantle the direction machine to
see the gear and rack have wear, instead the parts
according to the inspection.
2 、 Whether the inspection gear drive reverse gap does
surpass the rating
If it does, adjust the gap and the bolt.
If cannot reduce the gap through the adjustment, instead
the gear, rack
3、Inspects the dustproof rubber set whether gets older and
dehiscence. Replace the older and dehiscence rubber
wrap
4、Inspect the tow balls on the steering tension rod
whether rotates nimbly with no loose. If it is not,
replace the ball.
5、Inspects the dustproof rubber set of the ball whether
gets older and dehiscence. Replace the older rand
dehiscence rubber wrap.
6、Inspect the steering tension rod whether have cracked
and distortion. If it does, through the sizing repair
Warning: Do not use the welding to repair the steering
tension rod.
