background image

 

 

www.powermaxfitness.net 

14 

2. KEY FUNCTION.

 

‘SELECT’ KEY:

 

Manual Model: 0:00 
Count down Time model: 15:00 MIN: SECONCDS. 
Count down distance model: 1.00 KM 
Calories: 50.0 
Inner Procedure: P01-P12. 

‘START’ KE

Y: Starting the treadmill as long as power on and safe key grip compete. 

‘STOP’ KEY:

 Pressing it later. STOP treadmill running. 

SPEED: ‘+’ this sign to be increase the speed.   ‘

-

’ this sign to be decrease the speed.  If you 

press it over 0.5 con or - sign, the speed will be automatic increasing or decreasing. 
SPEED 6,8,12 No. Show in console.it means fast speed shortcut key. E.G., It can adjust the speed 
6KM smoothly. 
 

SMART: Start the SMART mode, the treadmill memorizes this motion track automatically, such as 
the speed and slope values of different time periods. If the motion time exceeds 10 minutes, the 
motion track data will be saved or it will be discarded. The next time the SMART mode is started, 
it will run according to the current motion track automatically. If the user modifies the speed or 
slope, the treadmill will abandon the track repeat function. The user must adjust the speed and 
slope  automatically  (full  manual  mode),  but  the  motion  time  exceeds  10  minutes,  the  current 
motion track will be saved, covering the previous motion track data. 

3. FAST STARTING (MANUAL MODEL) 

Pls following operation step by step. 
POWER  ON/OFF--------POST  SAFE  KEY  GRSIP-----------START  KEY------

SPEED  ‘+’  OR  ‘

-

’ 

AND INCLINE ‘+’ OR ‘

-

’ 

 

4, MANUAL MODEL 

 

1.STARTING:0.8KM/H---------

SPEED ‘+’ OR ‘

-

’ AND INCLINE ‘+’ OR ‘

-

’ 

 

 

2.MODE KEY----------TIME window:15:00 twinkle. 

The  or - and SPEED + or - can adjust the time. The range of time: 5:00-99:00. 

4. FUNCTIONS OF THE SAFETY LOCK: 

In any state, if pulling off the safety lock, you may immediately stop the motor running, and then 

the time window will display the marks “

------

“, and the buzzer will emit “B1

-B1-

B1” alarm 

sound. At this point, except for the shutdown, the any other operations cannot be implemented 

Summary of Contents for TDA-125




















Reviews: