www.powermaxfitness.net
17
6. PRODUCT MAINTENANCE
Lubricating
The running belt must be lubricated with specially configured methyl silicone oil after used for a
period of time.
1. Advice:
When use time a week is less than 3 hours, it should be lubricated once in five months.
When use time a week is between 4-7 hours, it should be lubricated once in two months.
When use time a week is more than 7 hours, it should be lubricated once in one month.
It can’t be over
-lubricated. It is not the more lubricant, the better. Remember: proper lubricating
is the important factor to increase the treadmill’s service time.
2. Lubricating methods
First:
For the methods to examine whether it is needed lubricant, you only need catch up the
running belt and touch the central part of the back of the belt with hand as nearly as possibly. If
the belt is with silicon resin (a bit sense of dampness) inside, this means no lubricant is needed; if
the running board is dry and you feel no silicon resin inside, this means lubricant is needed.
A.
Steps for coating the running board with lubricant: (see the picture)
B.
Stop the rotation of the running belt and fold the machine.
C.
Pick up the belt of the back of the body frame: stretch the oil holder as nearly as possible
into the moving place of the belt, coat the inner side of the belt with silicone oil and coat
both sides of the belt with silicone resin, and then operate the treadmill at the speed of 1K
M/H so as to evenly coat the silicone resin; and step on the belt from left to right for a few
minutes, then the silicone resin will be completely absorbed by the belt.
Second: Automatic refuelling: In order to ensure adequate lubrication between the treadmill and
running belt and to extend the service life of the treadmill, we equip the treadmill with an
automatic refuelling system that does not require manual refuelling to prevent forgetting to refuel
and damaging the treadmills. Treadmill cumulative operating mileage reaches the specified value,
the system will automatically add appropriate amount of oil to the treadmill and clear the
kilometre counter, restart the cumulative mileage. 5-inch blue screen run after running 300 km oil
bottle logo blinking, this time to remind users to refuel, you must press the Confirm button to
confirm the oil tank has been filled with oil, oil flashes logo back to normal.