www.powermaxfitness.net
9
2.
Use combination wrench and 5# inner hexagon spanner to untighten the screws and remove
the manual incline module. Keep the manual incline modules in places where children cannot
reach
.
3.
Take out the moving wheel modules from the accessory bag, cut the ties and assemble it as
shown in picture 1, and then tighten it with screws. Picture 2 is the well locked condition.
After assembling, unfold the running deck and make the wheels flat on the ground (as shown in
Picture
USING INSTRUCTIONS
Using treadmill
1)
Insert the power plug properly and turn on the switch (in red colour)
When the light is on, there will be a sound of “Di”, and then the screen will be light up.
1
