Rev: 1.1
Page 7 of 13
Current Lead Connections
1. Connect the 3-Phase Current Direct Probes (terminated with 6mm plugs) to the
PowerMaster
®
.
2. Insert the probes into the “TEST CURRENT IN”. According to the color code, plug the
phase DRIVE into the blackfemale receptacle (DRIVE, BLACK) and the RTN into the
white female receptacle (RETURN, WHITE) for each phase.
Forms 1,3
Forms 2, 4, 5, 12, 13, 25, 26,
35, 45, 56, 66,
Forms 6, 8, 9, 10, 11, 14, 15,
16, 17, 29, 36, 39, 46, 76
Removal
To remove the probes, push into the receptacle gently and now the probe will unlock for
removal.
Communication and Power Connections
1. Connect the DB9 cable to “RS232” on the PowerMaster
®
and “CONTROL IN” on the
MTA15Z.
2. Connect the gray power cable to “AUX ANALOG” on the PowerMaster
®
and “DC IN” on
the MTA15Z.
Cables from PowerMaster
®
Cables to MTA15Z
Alternate Power Connection (using the AC Power Supply and Cable)
1. Connect the AC Power Supply and AC Power Cable together.
2. Plug the cable into the “DC IN” on the MTA15Z.
3. Plug the AC Power Supply into an AC source between 100-240VAC.
