6
TO CLEAR A NAIL JAM:
1. It helps to tap the Driving Blade back to the retracted position before
trying to remove a jammed nail. A spare Driving Blade works best for
this.
2. Try to pull the jammed nail out of the gate with a pair of long nose
pliers. If this does not work remove the four (4) cap screws holding the
Foot, Gate and Nail Channel Assembly together.
3. Separate the Foot and Gate with a screw driver just enough to clear out
the jammed nail.
4. Put thread locking compound on all screws and reassemble the
components.
WARNING
Never hit the Nailer with excessive force or with the
metal end of the mallet, this will damage the nailer.
Before each use, check all screws to be sure they are tight. Shock and
vibration can loosen screws. Do not over tighten any screw.
Summary of Contents for Powernailer 50M
Page 4: ...4...
