For fasteners jammed inside the magazine:
1. Unplug tool power cord.
2. Press down latch and pull back on magazine.
3 Remove jammed fasteners using pliers if needed.
4. Push magazine cover forward until latch catches.
For fasteners jammed in discharge area :
1. Unplug tool power cord.
2. Grab jammed fasteners with pliers and remove.
3. If fastener can not be reached from
discharge area refer to above
for fasteners jammed inside the magazine.
4. Push magazine cover forward until latch catches.
CAUTION: Always unplug the tool power cord before adjusting the tool, clearing
jams, servicing, carrying to a new work location, or when not in use.
7
STAPLER SAFETY LABELS
CLEARING JAMS
Use a needle-nose pliers to
remove jammed staples
WARNING!
To reduce risk of injury, user must read and
understand operating manual before using.
Always wear eye and ear protection.
Unplug when servicing or not in use.
Keep away from water.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe
leer y comprender manual de instrucciones antes de
usar. Siempre use aprobada protección
ocular y auditiva. Desconecte cuando en el
mantenimiento o no esté en uso. Mantener
alejado del agua.
