23
Longwoods Ltd._0
4
_201
3
Attach the left and right swing handle bars (3 L+R) by placing them on top of the swing bars (13 L+R).
Fix with four Allen bolts M8*20 (6), four spring washers
φ
8 (9) and four curved washers
φ
8 (5). Do
not tighten the bolts fully.
Attach the footplate support bars (29 L+R) to the crank (38 L+R) with coated Allen bolts M8*20 (10),
spring washers
φ
8 (9) and washers
Ф
8*21*2t (32). Fix the plastic covers (53) to the rear side of the
footplate support bars (29 L+R) with screws (54). Do not tighten the bolts fully.
Attach the footplate support bars (29 L+R) to the lower swing bars (13 L+R) with Allen bolts M10*78
(21), washers
φ
10 (17) and nylon lock nuts M10 (16). Fix the plastic covers (22) to the front side of
the footplate support bars (29 L+R) with eight screws M5*12 (23).
Step 4: Footplates assembly
Attach the right footplate (28 R) to the right footplate support bar (29 R) with carriage bolts M6*55
(57). Fix underneath with flat washers
Ф
6 (56), spring washers
Ф
6 (55) and knobs (41). Attach the left
footplate (28 L) in the same manner to the left footplate support bar (29 L).
Step 5: Handlebar assembly
Summary of Contents for FET8315P
