34
Step 1: assembling the front and rear stabiliser
Attach the front stabiliser (39) to the main frame (68) with two curved washers (13) and two cap nuts (48).
Remove the two allen bolts (14), spring washers (15) and washers (70) from the rear stabiliser (92). Attach the
rear stabiliser (92) to the main frame (68) with two allen bolts (14), two spring washers (15) and two washers
(70).
STEP 1
49
39
13 48
92
14
70
15
Step 2: assembling the handlebar post and connecting the hand pulse cable
Put the handlebar post (25) in a vertical position. Place the plastic cover (37) over the lower part of the
handlebar post (25). Keep the upper hand pulse cable (28) hanging from the handlebar post until it is
connected.
Connect the upper hand pulse cable (28) with the lower hand pulse cable (45).
Put the handlebar post (25) in the main frame (68) and secure the handlebar post (25) with six allen bolts (14),
six spring washers (15) and six curved washers (13).
STEP 2
25
45
37
28
13
14
15
68
Summary of Contents for FET8319P
Page 2: ...Inhoud Nederlands 3 Deutch 16 English 29 Fran ais 44 e tina 57...
Page 18: ...18 DAS PRODUKT...
Page 32: ...32 THE PRODUCT...
Page 59: ...59 PRODUKT...
