The stepper designed to be easy to assemble and to use.
IMPORTANT: remove all parts from packing and inspect for damage.
Step 1
Remove the four plugs from the left and right ends of the front and rear stabilizers. Discard these plugs.
Step 2
Insert the two large rubber feet into each of the rear stabilizer ends. Align the key on the foot with the
slot in the tube. Ensure that the screw holes are aligned, then fit and tighten one screw in the side of
each foot.
Step 3
Push the two small rubber feet over the left and right ends of the front stabilizer bar. Note: if you have
bought the upper body cords with your unit then please attach these ones to the eyes on the front
stabilizer bar.
26
