Step 7
Assemble the water bottle holder (65) to the main frame (1) with the help of some tools. Insert the water bottle
(64) into the water bottle holder (65).
Step 8
Fasten the computer holder (69) to the handlebar (5) by using 2pcs of M6x12L cross recessed pan head bolt
(70). Fasten the computer (68) to the computer holder (69) and link the computer (68) with connector plug.
Attach the connector plug to the connection point. You can find the connection point on the underside of the
bent frame opposite the speed handle.
Step 9
When the installation is completed, please carefully check and ensure all the screws and nuts are fastened firmly.
Note:
1. Check all the nuts, nut caps and pedals to be in good order regularly. If you find any defective parts, do not
exercise until the equipment is repaired.
2. Pay extra attention to easily damaged parts, such as the clamp break (41). If you find it does not work
adequately or is loose, do not use the equipment until it is repaired.
3. If you find the chain is loose, loosen nut cap, and adjust Nylon nut by using 10mm-sleeve-spanner. When it
is tightened, fasten nut cap.
21
Summary of Contents for Speed Bike FBS8296P
Page 2: ...2 ...
