POWDP20150
EN
Copyright © 2021 VARO
P a g e
|
11
www.varo.com
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25s .
10 CLEANING AND MAINTENANCE
10.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
10.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
11 TECHNICAL DETAILS
Model nr.
POWDP20150
Rated voltage (direct current)
20 V
Rotation speed
0-1300 min-1/0-2000 min-1/0-2900 min-1
Impact rate
0-4350 ipm
Socket type
1/2”
Max. torque
Max. 2/100/220 Nm
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
87 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Max. 6,7 m/s²
K = 1,5 m/s²
