POWE30010
EN
Copyright © 2021 VARO
P a g e
|
6
www.varo.com
7.3
Adjusting the base (Fig. 3)
The base (7) can be adjusted 45° (left or right) in relation to the saw direction to facilitate
contour sawing. Loosen the two screws (11) under the base, adjust the plate to the desired
angle and retighten the screws.
Angle setting can be seen on scale on top of the base.
7.4
Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
8
TECHNICAL DATA
Rated voltage
230-240V
Rated frequency
50Hz
Rated power
450W
Rotation speed
3000min
-1
Cable length
2m
Carbon brush motor
Yes
Cutting depth wood
55mm
Connection type
U-shaped
Soft grip
Yes
Power on LED light
Yes
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
86 dB(A)
Acoustic power level LwA
97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
4.2 m/s²
K = 1.5 m/s²
