CF(M)-3K/2K-12 SUPERCOMBI USER’S GUIDE
1. Product Introduction
1.1 Basic Information
“The series CF(M)-3K/2K-12 Charging-Inverter-MPPT All-in-One machine”
(hereinafter referred to as “SuperCombi”) is independently developed by
Power Science Technology Co., LTD.. This power electronic transformation
device featured with high power density and super large charging current is
integrated with charger, inverter and photo-voltaic MPPT controller functions. It
is achieved by the patented bidirectional convert technology:
As a charger, the machine can output an charging current up to 200A;
As an inverter, the output is a pure sine wave, which is very fit for the
sensitive and motor loads;
As an MPPT controller, the module is so compact that it can be installed
inside the machine. All the resources, including the cable, the screen, the
cooling system can be shared;
Loads Priority
and
On-Grid Compensation
function of the SuperCombi can
substantially improve the ability to drive large loads. Hierarchical management
and advanced set up function make the SuperCombi suitable for various
scenarios and different purposes, providing great convenience for users.
Features:
Pure Sine Wave Output
High Efficiency: The efficiency is up to 93%
X-small size
Large Charge Current: The Max. Current can be as high as 200A
Surge power can be three times of continuous output
Wide DC Input range: Full Power Output @ battery voltage 10~15V dc,
De-rated Power output @ battery voltage 9~10Vdc
The built-in 32A AC Relay can achieve larger bypass power.
Energy Saving Mode: Ultra-low Loss, standby power consumption can be
lower than 10W.
