POWX07582
EN
Copyright © 2017 VARO
P a g e
|
3
www.varo.com
CROSS-CUT AND MITRE SAW WITH TOP TABLE
POWX07582
1 APPLICATION
The machine is designed for sawing wood, metal and plastic. It is not designed for commercial
use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1.
Upper sawing table
2.
Riving knife
3.
Upper saw blade guard
4.
Mitre and width guide
5.
Locking knob for the mitre and width
guide
6.
Safety lock
7.
ON/OFF switch
8.
Switch A
9.
Mitre locking knob
10. Indicator, mitre scale
11. Mitre table
12. Base
13. Guide
14. Lower saw blade guard
15. Indicator, bevelling scale
16. Bevelling lock
17. Table scale
18. Saw blade
19. Sawing head
20. Switch
21. Saw guide
22. Locking knob
23. Mitre index
24. Push block
25. Workpiece clamp
26. Hexagonal spanner
27. Exhaust pipe
28. Dustbag
29. Switch B
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
Mitre and width guide
Push block
Workpiece clamp
Hexagonal spanner
Exhaust pipe
Dustbag
Upper saw blade guard
Transparent saw blade guard
Lower saw blade guard
Mitre index
Manual
If any parts are missing or damaged, please contact your dealer
