POWX1183
EN
Copyright © 2015 VARO NV
P a g e
|
2
www.varo.com
DEMOLITION HAMMER 1050W
POWX1183
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1.
SDS Chuck
2.
Fastening sleeve
3.
Auxiliary handle
4.
Oil cover
5.
Collar of auxiliary handle
6.
Lock on button
7.
(Anti Vibration System)
8.
On/off switch
9.
Handle
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
Demolition Hammer 1050W
Auxiliary handle
Spanner
Grease cup
- SDS point chisel: 280mm
- SDS flat chisel: 18 x 280mm
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before use
In accordance with essential
requirements of the European
directive(s)
Class II - The machine is
double insulated; Earthing wire
is therefore not necessary.
Always wear safety goggles
