POWX1350
EN
Copyright © 2021 VARO
P a g e
|
4
www.varo.com
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY WARNINGS
Do not leave the grinding wheel unattended while it is operating.
Grinding generates sparks, keep away all flammable substances and materials.
Never touch the moving grinding wheel.
The motor is specially rated for intermittent use, maximum 15 minutes continuous use.
Do not attach modules when the grinding wheel is moving.
Do not use the grinding wheel without a module in place
Before removing a module, switch off the power unit and allow the grinding wheel to come
to stop.
7 OPERATION
7.1
High speed steel drill sharpener ((Fig. 1)
Sharpens all high speed steel drill bits from 4-13mm
Unique ‘True Point’ action ensures accurate finish
Precisely locates high speed steel drills for correct sharpening angles.
Re-sharpens broken drill bits
SHARPENING HSS BIT (1a-1i)
1.
Slide module
‘high speed steel drill sharpener’ onto the power unit
2.
Remove the clamp from the clamp holder and insert the drill bit (1a)
3.
Tighten the clamping ring slightly so the drill bit is still free to move.
4.
Place the clamp containing the drill bit into the setting slot, using the grooves in the
side to lower it in correctly (1b)
