POWX1706
EN
Copyright © 2021 VARO
P a g e
|
10
www.varo.com
6.3.3
Using the ball needle (12)/ universal adapter (11)
Area of use:
The ball needle (12) can be used to inflate various balls. The universal adapter (11) can be used
to inflate air mattresses or similar.
▪
Press the lever quick coupler (9) downwards to attach it.
▪
Insert the ball needle (12) or the universal adapter (11) into the lever quick coupler (9) and
then release it.
▪
Inflate as described above.
NOTE! To avoid damage to the valve, you should moisten the ball needle
(14) before insertion.
6.3.4
Using the adapter set
The adapter set allows the tyre filling device to be used for the following additional applications:
▪
Inflating pools, air mattresses or dinghies using the additional adapter (17).
▪
Inflating items with screw valves (e.g. dinghies) using the screw-on valve adapter (16).
▪
Deflating large-volume items. Use the deflating valve adapter (15) for this purpose.
▪
The two tapered universal adapters (14/11) can also be used to inflate air mattresses.
6.3.5
Using with the extension nozzle (19)
The extension nozzle (19) is used for cleaning/blowing out of concealed spaces or hard-to-reach
areas, as well as for the cleaning of contaminated equipment. The infinitely variable trigger (10)
allows an exact dosage of the compressed air.
If you want to use the extension nozzle (19), you must first unscrew the hose with the lever quick
coupler (9) from the gun with the manometer (6).
▪
Now screw on the extension nozzle into the gun with the manometer.
7 TECHNICAL DATA
Rated voltage
220-240 V
Rated frequency
50 Hz
Rated power
1100 W
– 1.5 HP
Rotation speed
3750 min-1
Rated pressure
8 bar
Air debit (capacity)
180 l/min
Protection class
II
Degree of protection
IP20
8 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
84 dB(A)
Acoustic power level LwA
96 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
