POWXQ5330
EN
Copyright © 2013 VARO
P a g e
|
11
www.varo.com
9.12
Replacing the saw blade
Disconnect the tool from the outlet before working on the saw blade. Wait a
while before touching the saw blade. It can be very hot. The dents of the
saw blade are very sharp.
Position the saw in the uppermost position.
Loosen the screw of the guard plate.
Turn it around until the attachment bolt is visible.
While holding down the blocking button, use the delivered key for loosening the bolt in a
clockwise direction.
Assembly is carried out in the reverse order.
