13
Super Fridge Mode
: Refrigerator cools to 0
℃
for 150 minutes and then
returns to the per-set temperature
Ice Cube Symbol:
Press Ice cube symbol if indicator appears press and hold
Ice discharge button with glass / cup and ice cubes will release.
Inflow adjustment:
This button is used to adjust the volume of water flowing into
the ice making box , the default setting time is 5 seconds , it can be adjusted
according to low water pressure areas , please pay attention to situations were
excessive water may cause ice adhesion , Press this button for 5 seconds or longer
until
symbol flashes , at this time you can press this button to adjust the
time adjustment increases by .5 seconds for each press ( for a maximum of 10
seconds it will display
.
Ice Water:
Press Ice water symbol if
indicator appears press and hold ice
discharge button with glass / cup and cold water will flow.
When the appliance is switched on for the first time, the temperature should be
set so that after 24 hours, the average fridge temperature is no higher
than +5 degrees Celsius. Some sections of the fridge may be cooler or warmer
(such as the salad crisper and the top part of the cabinet ) which is quite normal.
The normal storage temperature of the freezer should be -18 degrees Celsius.
We recommend that you check the temperature with an accurate thermometer
to ensure that the storage compartments are kept to the desired temperature.
