7
source of heat or freezer, maintain the following minimum side
clearances:
From Cookers 50 mm
From Radiators 300 mm
From Freezers 25 mm
5.
If fitting this refrigerator in a cabinet unit, ensure that the back of the
Fridge has at least 10 cm of free space and the sides have 2 cm
6.
Turn the levelling feet to ensure that the fridge is level
Before you start using the fridge check that:
1.
The interior is dry, and air can circulate freely at the rear of the
cabinet.
2.
Clean the interior as recommended under "CLEANING AND CARE."
3.
Insert the plug into the wall socket and switch on the electricity
supply.
4.
You will hear a noise as the compressor starts up. The liquid and gases
sealedwithin the refrigeration system may also give rise to noise,
whether the compressoris running or not which is quite normal.
5.
When the door is open the fridge, interior light will come on.
6.
Set the thermostat to 4 and close door. After 30 minutes you should
observe a drop in temperature.
7.
Front edges of the cabinet may feel warm. This is normal.
8.
Do not load the appliance immediately it is switched on. Wait until the
Correct storage temperature has been reached. We recommend that
you check the temperature with an accurate thermometer
Food Storage
Summary of Contents for P450TTIBLM
Page 3: ...3 Features...
