5
START
Testing
Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent
and with clear water, and wipe them dry.
Notes:
E
lectric parts of the refrigerator can only be wiped by dry cloth.
1. Remark: turn the thermostat knob to the "4" position, turn on electricity. The compressor
begin to work..
2. Open the door 30 minutes later, if the temperature in the refrigerator decreased
obviously, it shows that the refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically set the temperature within
limits it opens.
Temperature Control Dial
Temperature Control
1.The temperature in the refrigerator compartment is controlled by the temperature
controller installed on the back wall of the refrigerator compartment.
2.Turn the thermostat knob to right or left, you can regulate the temperature inside the
refrigerator.
3.The marks on the knob are the temperature grades, not the exact number of the
degrees of temperature.”OFF” shows a forced STOP and “7” shows the lowest
temperature. Turn the knob from "1"position to "7"position, the temperature decreases
continuously. You may set the temperature control selector to any position according to
what you need.
4.Please set the selector to "4" position in normal use.
