PowerQuick Powered Ascender
(26)
PQ500-1 1-Sep-15
16.
Training
The information below sets out the Core Competencies for operators carrying out rope access work using the PowerQuick
Powered Ascender. They are also the competencies that will be assessed when an operator applies for Rope Access Training
Certificate. The assessment tests the candidate against these competencies in both a practical and a written/oral examination.
16.1.
Level 1 Worker
All operators should be competent to complete the following:
Load and operate the PowerQuick Powered Ascender in both the ascent and descent mode.
Inspect and comment on rope access rigging, anchors, knots and equipment.
Demonstrate an understanding of the requirements for working on roofs.
Demonstrate an understanding of the OSHA safety codes.
Ability to demonstrate tying basic knots.
Identify and comment on potential hazards encountered when rope access used on a worksite.
Perform self-rescue.
Demonstrate an understanding of the requirements for public protection when working at height.
16.2.
Level 2 Technician
In addition to being competent in all aspects of the Level 1 requirements candidates should also be competent to:
Prepare and implement a risk assessment and Safe Work Method statement
Demonstrate a thorough knowledge of worksite organization.
Demonstrate a thorough knowledge of equipment usage and maintenance.
Complete the following safely, maintaining a minimum of two points of contact at all times:
Demonstrate rigging ropes using a selection of anchors and equipment.
Demonstrate hauling and lowering systems.
Demonstrate retrieval of unconscious or injured workmate from ascending gear.
Demonstrate long rope transfer using 2 back up devices.
Demonstrate horizontal traversing.
16.3.
Level 3 Supervisor
Pre-requisites for Level 3:
Experienced Level 2 in a wide variety of worksites.
Senior first aid certificate.
Demonstrate all above L1/L2 requirements safely with finesse.
Minimum L3 competency:
Complete written paper detailing complete project and regulatory requirements in industry worksite/task of their choice
e.g. urban, confined space, electrical etc.
Demonstrate good management, supervision and communication skills. Complete the following safely, maintaining a
minimum of two points of contact at all times:
Demonstrate advanced rigging techniques using a selection of anchors and equipment in various work situations.
Demonstrate haul/cross haul/lowering of a load (could include workmate).
Demonstrate retrieval of unconscious or injured workmate from awkward access/lead climbing in various work situations.
Demonstrate horizontal and vertical lead climbing.
Summary of Contents for PQ 500-1
Page 46: ......
Page 48: ...NOTES...