Thank you for purchasing the Defender 650/1200/1600. It is designed to provide
safe and reliable power protection to your precious electronics equipment.
Before you start using the product, please read this user’s manual. It contains
instructions relating to safety, installation, operation maintenance and warranty.
Please keep this manual in a safe place for future use.
Please read carefully the following safety instructions before using the Defender
650/1200/1600
To prevent the risk of fire and electric shock, install the product in a controlled
temperature and humidity indoor area where it is free from conductive
contaminants.
To reduce the risk of overheating of the product, do not cover the cooling vent
holes and avoid exposing the unit under direct sunlight or installing the unit near
heat emitting appliances such as heaters or furnaces.
Do not connect non-computer related equipment such as medical equipment,
life-support system, microwave oven and vaccum cleaners. Also since this unit
output is not sinusoidal, please do not connect AC line filters, motors and other
inductive / capacitive equipment. This equipment might damage the unit.
Do not plug the unit input cord to its own output.
Do not allow liquids or any foreign object to get inside the unit. Do not place any
liquid formed materials on the top of the unit or right next to it.
For safety purpose, proper grounding is necessary during installation of the unit
in order to reduce the leakage current below 3.5mA.
Hazardous due to electric shock. Although, unit is disconnected from the mains,
hazardous voltage may still be accessible through supply from the battery.
Battery connection should be disconnected when servicing the product.
User Manual
PSD 650/1200/1600
Line Interactive UPS
Uninterruptible Power Supply System
NetGuard
®
UPS Monitoring Software
IMPORTANT
Download the latest NetGuard Monitoring Software:
www.powershield.com.au/index.php/downloads
Default password is: administrator
