www.powershield.com.au
10
Indicates the setting operation.
Battery, Input, Temperature, Output and Load information
Indicates the input voltage, input frequency, battery voltage,
battery capacity and ambient temperature.
k: kilo, W: watt, V: voltage, A: ampere, %: percent,
℃
: centigrade degree, Hz:
frequency, AC: alternating current, DC: direct current
Indicate the output voltage, output frequency, load current and
load percentage.
k: kilo, W: watt, V: voltage, A: ampere, %: percent, Hz: frequency, AC: alternating
current
Load information
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-
100%.
Indicates overload.
UPS status
Indicates that programmable management outlets are working.
Indicates that the UPS alarm is disabled.
Indicates the UPS powers the output directly from the mains
Indicates the UPS is working in boost mode
Indicates the UPS is working in buck mode
Indicates the UPS connects to the mains.
Indicates the UPS connects to the PV
Indicates the AC to DC circuit is working
Indicates the inverter circuit is working
Battery information
Indicates the Battery level by 0-25%, 26-50%, 51-75%, and
76-100%.
3-3. Audible Alarm
Battery Mode
2 beeps every 30 seconds
Low Battery
Rapid one beep every second
Overload
2 short beeps every 2 seconds
Fault
Continuously sounding
