background image

 

14 

Regularly check to see if the blade is securely attached, is in good condition and is sharp. If the contrary 
is the case, sharpen the blade or replace it. In the event that the blade strikes an object, immediately turn 
off the lawn mower and wait for the blade to come to a complete stop. Then inspect the condition of the 
blade and the blade mount. Replace any parts that are damaged. 
 
 
 

USING AS SIDE DISCHARGE 

 
You should fit the mulching adapter in order to use the side discharge.  
1.

 

On the side of the mower, lift the side discharge cover. 

2.

 

Slide two hooks of side discharge chute under hinge pin on the side 
discharge cover. Lower the side discharge cover. 

Caution:

 Do not remove side discharge cover at any time. 

 
 
 

USING AS A REAR BAGGER  

 
To use the grass catcher to collect clippings while you are operating the mower. 
1.

 

Attached grass catcher following instruction in the lawn mower preparation. Grass clippings will 
automatically collect in bag as you run the mower. Operate mower until grass catcher is full. 

2.

 

Stop engine completely by releasing the engine start/stop lever. Make sure that the engine has come 
to a complete stop. 

3.

 

Lift rear discharge door and pull grass catcher up and away from the mower to remove the grass 
catcher. Dispose of the grass clippings and reinstall the grass catcher when complete. 
 

Warning:

 If you strike a foreign object, stop the engine. Remove spark plug wire, 

thoroughly inspect mower for any damage, and repair damage before restarting and 
operating. Excessive vibration of the mower during operation is an indication of damage. 
The mower should be promptly inspected and repaired. 

 

Summary of Contents for DB8621P





















Reviews: