background image

 

ASSEMBLY 
 

 

WARNING: 

Disconnect air line from tool and remove fasteners from magazine before 

making adjustments or personal injury may result. 
 

 

AIR FITTING

 

This tool uses a 1/4" N.P.T. male plug. The inside diameter should be 0.180" (4.6 mm) or larger. The 
fitting must be capable of discharging tool air pressure when disconnected from the air supply.  

 
WARNING

Always use couplings that relieve all pressure from the tool when it is 

disconnected from the power supply

. Always use hose connectors that shut off air supply 

from compressor when the tool is disconnected.  

 
 
 OPERATING INSTRUCTION 
 

WARNING:

 Read and thoroughly understand all instructions and safety information before 

operating this brad nailer. Failure to do so may cause serious injury or death. Do not allow 
anyone to operate this brad nailerwho has not read this manual. a brad nailercan be dangerous 

if assembled or used improperly. Do not operate this brad nailer if you have doubts or questions 
concerning safe operation. Call our customer service department at 1-800-791-9458 to address these 
concerns. 
 

 

WARNING:

 Always wear safety glasses, safety gloves, safety shoes and suitable work 

clothing when operating this impact wrench. Do not wear jewelry, neckties or other loose 
clothing which could get caught in moving parts 

 
PowerSmart PS6130 Pneumatic Brad nailer drives 18 gauge brad nails from 5/8" to 2" (15 mm to 50 mm) 
in length. The tool has a die cast aluminum body for strong and light weight design. The tool features a 
comfortable rubber handle for improved control and comfort even during extended use and a contact 
safety to prevent accidental firing and an adjustable depth for various applications.  
 

Loading 

 

WARNING: 

Keep the tool pointed away from yourself and others. Serious personal injury 

may result. 

WARNING: 

Never load nails with the contact trip or trigger activated. Personal injury may 

result. 

When replacing nails in your model PS6130, follow these guidelines: 
 
Nail Type: 18 gauge brad nail 
Length: 5/8"- 2" 
Capacity: 100 pcs 
 

 
 

Summary of Contents for PS6130

















Reviews: