PowerSmith PWLS150H, Operator'S Manual

7

FIG 2

4

English

ASSEMBLY INSTRUCTIONS

ATTACHING WORK LIGHT HEAD TO STAND

1.  Place the stand (9) on a flat surface. 
2.  Position the U-Shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1.
3.  Use the locking knob (6), flat washer and spring washer to secure the work light head on the stand. 

OPERATION

ADJUSTING THE LIGHT DIRECTION

Your work light can be tilted vertically up to 30° down or 90° up. 

To Adjust the Light Direction,

 loosen the side locking knobs (5). Adjust the work light head to desired position, and 

retighten knobs. 

SWITCH ACTION

Your portable work light is equipped with a rocker switch (7) located on 
the back side of the work light.

Press the switch on the left side marked “I” to turn on the work light at 
7500 lumens. Press the switch on the right side marked “II” to turn on 
the work light at 15,000 lumens. Turn off the work light by setting the 
switch in the middle position “O”. See FIG 2. Always turn the work light 
off before unplugging.

MAINTENANCE

Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner. 
Use similar care for the stand. 

 WARNING:

Always make sure the work light is unplugged and 

completely cool before attempting to clean it. 

WARRANTY

This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This 
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is 
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please 
call the Toll-Free Help Line for possible solutions.

ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 5 YEAR WARRANTY. 

HELP LINE

For questions about this or any other 

PowerSmith

™ product, 

Please call Toll-Free:

888-552-8665.

Or visit our website: 

www.powersmithproducts.com

©Richpower Industries, Inc. All Rights reserved

Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper