31
4.6 Options
SNMP card
:
internal SNMP / external SNMP optional
◆
Loosen the 2 torque screws (on each side of the card).
◆
Carefully pull out the card. Reverse the procedure for re-installation
The slot called SNMP supports the MEGAtec protocol. We advise that NetAgent II-3 port is
also a tool to remotely monitor and manage any UPS system
NetAgent II-3Ports supports the Modem Dial-in(PPP) function to enable the remote control
via the internet when the network is unavailable .
In addition to the features of a standard NetAgent Mini, NetAgent II has the option to add
NetFeeler Lite to detect temperature, humidity, smoke and security sensors. Thus, making
NetAgent II a versatile management tool. NetAgent II also supports multiple languages and is
setup for web-based auto language detection .
Typical topology of the UPS Network Management
Relay card
The card is used for providing the interface for UPS peripheral monitoring. The contact
signals can reflect UPS running status. The card is connected to peripheral monitoring devices
via DB9 female to facilitate the effective monitoring of the real-time status of UPS and timely
feedback the status to monitor when abnormal situation occurs (such as UJPS failure, mains
interruption, UPS bypass and ect.). It is installed in the intelligent slot of the UPS.
The relay card includes 6 output ports and one input port. Please refer to the following table
for detail.
DB9 interface: Connect to upper control terminal. The definition of the pins is defined as
below:
Summary of Contents for YDC3300
Page 33: ...32...
