Page 28
4.5 – DRIVING CARD
A driving card is selected to drive the wheelchair.
The training card includes a speed dial, speed
slider and speedometer/odometer (see Figure 56)
to view and control the wheelchair speed while
driving.
The driving cards also provide access to the lights
(see 4.7 Lighting control and dashboard) and the
horn (see 4.8 Sound the horn).
Figure 56 : Driving map showing speedometer/odometer, speed dial and
speed slider
Note
The speedometer/odometer must be calibrated before use, as its accuracy will differ depending on the models of
wheelchairs and their variations. See the LiNX system installation manual for more information on
speedometer/odometer calibration.
4.6 – CONTROLLING AND VIWE SPEED
The speed Dial:
The speed dial displays the speed parameters of the user and the wheelchair
(see Figure 57).
It is divided into ten
segments, representing the speed range of the wheelchair. Each segment can display one of three colors: green, yellow,
and gray.
The green area ( in 4.5) shows the speed range of the
drive function, which is set by the user with the position of
the speed slider - see the next section The speed slider.
The yellow area ( in 4.5) shows the maximum possible
range available to the user in this training function.
The gray area ( in 4.5) shows the maximum range of the
wheelchair; no gray area is available for this training
function.
Figure 57 : Driving Card – not driving