Page 49
6.4.1.3 – Assign actions to switches – Android Devices
Note
To identify and assign actions to switch :
Open the Android device's Switch Access menu :
Settings | Accessibility | Switch Access
Figure 102 : Selecting switch Access
Tap on
Settings
(top right-hand corner).
Note
Tap on Assign switches for scanning, or Assign switches to actions
Select one of the actions in the list. For example, tap on Select.
A notification displays asking you to:
Press a switch combination to add or remove it from the list.
At this point, activate the external switch (this could be a tap on the remote module's touch screen or a joystick
movement in one of the four quadrant directions: forward, reverse, left and right). This assigns the switch to the selected
action. Tap OK on the notification. Repeat for as many switches that need to be assigned.
Figure 103 : Selecting external switches
The following instructions are illustrative only as the steps may differ slightly between different Android
versions
.
The following instructions are illustrative only. Switches can be assigned to many actions, the scope of which
is beyond the scope of this manual
.
