4. Plug the appropriate plug on the
Multi Purpose Adaptor (5)
into the appliance. The adaptor has 3 Volt DC, 6 Volt DC
output.
5. Insert the plug on the other end of the wire attached to the
Multi Purpose Adaptor (5)
into the appropriate DC Outlet
on the
Regulator (2)
. For your reference,
FIGURE 2
shows the adaptor wire plugged into the 3 Volt DC outlet.
6. Operate your appliance.
7. When finished, unplug the
Multi Purpose Adaptor (5)
wire plug from the
Regulator (2)
and then unplug the
Multi
Purpose Adaptor (5)
from the appliance.
Maintenance
When servicing the Solar Panels, Regulator, or Accessories, first disconnect the cable from the Regulator to
the Solar Panels.
1. Periodically, gently clean the surface of the Solar Panels with a wet, soft cloth.
2. Check the cable connections before each use.
Assembly Drawing
(7) lamp wire
(4) 12Volt light
(2) regulator
(5) multi-purpose wire
(1) solar panel
(3) Battery clamp
