PowerTech PL1000H, User Manual

 INSTRUCTIONS PL600H/PL1000H

17

2 channel transmitter

4 channel transmitter

(A)Button: “Open- Stop- Close- Stop”
(B)Button: Long Press for other device 
     turn-on, like garage door system
(A) Button: “Open- Stop- Close- Stop”
(B) Button: Long Press for other device 
      turn-on, like garage door system
(C) Button: “Pedestrian mode”

Or

(D) Button: “Pedestrian mode”

(A)Button: “Open- Stop- Close- Stop”
(B)Button: “Pedestrian mode”

(A) Button: “Open- Stop- Close- Stop”
(B) Button: “Pedestrian mode”
(C) Button: Long Press for other device turn-on, 
      like garage door system

Or

(D) Button: Long Press for other device turn-on, 
      like garage door system

Channel/Functions 

          SW2 switch on   

          SW2 switch off

1). The transmitter Reaction

LED1 Photocells
LED2 Photocells
LED3 RF Learning

LED1 will be on when the first pair of the photocells are activated.
LED2 will be on when the second pair of the photocells are activated.
LED3 will be on when RF-learn button is pressed.

LED Indication                                                                     Descriptions

4.1.2 Recognition of LED

4.1.3 Checking the Gate Movements

1). Release the gearmotor with the release key and move the gate to the middle so that it is free to move in both 
     opening and closing directions; then lock the gearmotor.
2). Perform the gate opening and closing several times and make sure the gates reaches the limit switch at least 2~3 
     centimeters before the mechanical stop.

Important notice: 

(1) Jumper 4: 

②

 and 

③

 in place: remote control button (C) usable ; 

      Jumper 4: 

① 

and 

②

 in place: remote control button (D) usable.

(2) Pedestrian mode follows function “F6-0~F6-5” settings.

2). The transmitter Learning

Press “RF Learn” button for 2 seconds, and the LED3 is on; then press the transmitter (A) button; the LED3 will blink 
twice and then be off. The system learning is complete.

3

2

1

3

2

1

Button (C) Usable

Button (D) Usable