PowerTech PL1000H, User Manual

 INSTRUCTIONS PL600H/PL1000H

5

3*20 Screw 

                                               3 pcs

Nylon screw anchor 

                                  3 pcs

Table 2: List of small parts for PPB-1 

     Quantity

3*20 Screw 

                                               3 pcs

Nylon screw anchor 

                                  3 pcs

Table 4: List of small parts for PPB-1 

     Quantity

3*20 Screw 

                                               3 pcs

Nylon screw anchor 

                                  3 pcs

Keys                                                              3 pcs

Table 3: List of small parts for PKS-1 

     Quantity

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

2.3.3 PH-2 Photocells

The pair of PH-2 photocells has to be installed on the 
wall and connected to the control panel. The function of 
the photocells is to detect the obstacles found on the 
optical axis between the transmitter (TX) and the 
receiver (RX).

2.3.4 PR-1 Radio Transmitter

PR-1 radio transmitter is used for the remote control of 
the gate movement. To use the transmitter, press and 
hold the button for 1 second. There are two buttons on 
the transmitter and (A) button is

 “open-stop-close 

mode” 

and (B) button is 

“pedestrian mode”

.

2.3.5 PF-1 Flashing Light

PF-1 flashing light is controlled by PL600H/PL1000H 
control unit and blinks when the gate is moving or blinks 
3 seconds before the gate moves. The flashing light 
stops blinking when the gates 

2.3.6 PKS-1 Key selector

The PKS-1 key selector is used for opening the gate 
outdoors without the radio transmitter. PKS-1 key 
selector is supplied with two keys

2.3.7 PPB-1 Push Button

The PPB-1 push button is used for opening the gate 
indoors without the radio transmitter.

TX

RX