2 INSTRUCTIONS PW220/PW230
Warnings
Please read this instruction manual carefully before the
installation of gate-automated system.
This manual is exclusively for qualified installation
personnel. Powertech Electronics Inc. is not responsible for
improper installation and failure to comply with local electrical
and building regulations.
Keep all the components of PW220/PW230 system and this
manual for further consultation.
In this manual, please pay extra attention to the contents
marked by the symbol:
Be aware of the hazards that may exist in the procedures of
installation and operation of the gate-automated system.
Also, the installation must be carried out in conformity with
local standards and regulations.
If the system is correctly installed and used following all
the standards and regulations, it will ensure a high degree of
safety.
Make sure that the gates works properly before installing
the gate-automated system and confirm the gates are
appropriate for the application.
Do not let children operate or play with the gate-automated
system.
Do not cross the path of the gate-automated system when
operating.
Please keep all the control devices and any other pulse
generator away from children to avoid the gate-automated
system being activated accidentally.
Do not make any modifications to any components except
that it is mentioned in this manual.
Do not try to manually open or close the gates before you
release the gear motors.
If there is a failure that cannot be solved and is not
mentioned in this manual, please contact qualified
installation personnel.
Do not use the gate-automated system before all the
procedures and instructions have been carried out and
thoroughly read.
Test the gate-automated system weekly and have qualified
installation personnel to check and maintain the system at
least every 6-month.
Install warning signs (if necessary) on the both sides of the
gate to warn the people in the area of potential hazards.
Summary of Contents for PW220
Page 1: ......
