OWNERS INFORMATION POWERTEK
Additional or replacement manuals may be obtained from your local PowerTek distributor. When log splitter
is received, complete the following record.
MODEL/SERIAL NUMBER: ____________________________
DATE OF PURCHASE: _________________________
WHERE PURCHASED: _________________________
Always mention the machine's model and serial number when ordering or writing about parts.
For convenience in ordering, parts are listed by part number, description and quantity. Always supply part
number and complete description when ordering. When assemblies can be used, order them to save time
assembling individual parts. Prior arrangements must be made before returning parts for warranty service.
Service calls should be directed to Customer Service at 1-877-769-7835.
To insure correct and prompt shipment of parts, always provide the following information when ordering.
1. Quantity of each part wanted
2. Part number and description
3. Model and serial number of log splitter
4. Preferred method of shipment: by mail, UPS, or airfreight
STORAGE
FOR SAFE STORAGE:
A.
Clean dirt and debris from engine and log splitter
B.
To prevent rusting, coat the areas where paint has been scraped with an oil based rust prohibitor. Do not
use heavy oil or grease because this will cause premature wear. Wipe off coating before use.
C.
Store splitter with ram in fully retracted position. It is required that you drain the gas from tank and run
engine until carburetor gas is exhausted before storing the log splitter.
13
