background image

SAFETY                                                                                        POWERTEK 

 

SAFETY RULES 

DO’S 
 

DO

 make sure that anyone who operates this chipper 

reads and understands all operating instructions as to its 
proper use and operation as well  as all safety 
instructions. 
 

DO

 block the tires of chipper before using.  DO check 

engine oil level before starting.  DO wipe up spilled fuel 
right away from the engine and chipper before starting. 
 

DO

 make sure there are no obstructions in the in feed 

chute before starting the engine. 
 

DO

 make sure all bolts, nuts and parts are tight before 

starting. 
 

DO

 make sure the discharge chute and deflector shield 

are properly adjusted to dispatch chips in a safe 
direction, away from pedestrians, animals, homes or 
other property that could be injured or damaged. 
 

DO

 keep children and pets away from the work area 

while you are operating the chipper. 
 

DO

 take care when chipping dead or frozen wood in 

order to avoid kickback. 
 

DO

 make sure that all safety decals are read and 

understood before operating the chipper. 
 

DO

 survey work area for any potential dangers for the 

operators of equipment. 
 

SAFETY GEAR 
 

DO

 wear appropriate safety clothing.  It is crucial to 

protect the operator from serious injury. 
 

DO

 wear eye protection (safety glasses or helmet with 

safety face shield.) 
 

DO

 wear hearing protection.  (Ear plugs or muffs.) 

 

DO

 wear gloves, heavy work shoes, and protective 

clothes. 

DO NOT’S 
 

DO NOT

 operate the chipper alone.  

DO NOT

 allow 

children to operate the chipper. 
 

DO NOT

 use your feet or hands to force material into 

the feed chute.  Use a push stick to push smaller or stuck 
branches into chute. 
 

DO NOT

 ride or allow anyone else to ride on or in the 

chipper. 
 

DO NOT

 override any safety devices that have been 

factory installed. 
 

DO NOT

 operate chipper with upper chamber open. 

 

DO NOT

 attempt to clear any debris from any chute or 

chamber while the chipper is running.  Disconnect spark 
plug wires and remove the key before any clean out is 
attempted. 
 

DO NOT

 smoke or use any type flame or spark near the 

chipper.  Always refuel the engine in an open area and 
with the engine shut off or the fuel may explode causing 
serious injury or property damage. 
 

DO NOT

 use the chipper under the influence of alcohol 

or drugs or you may cause serious injury to yourself or 
someone else. 
 

DO NOT

 for any reason, reach into feed area or 

chamber while chipper is running or serious injury or 
death can result. 
 

DO NOT

 wear loose clothing that may become 

entangled in brush or machinery or serious injury or 
death may occur. 
 

DO NOT

 wear any strings on clothing that may become 

entangled in brush or machinery or serious injury or 
death may occur. 

 
DO NOT

 wear any jewelry that may become entangled 

in the brush or machinery or serious injury or death may 
occur.

 

 

4

Summary of Contents for 727








Reviews: