Powertow 65 EZ VIPER, Owner'S Manual

(

Advanced Assembly

) 

LOTS OF PICTURES…LITTLE WORDING 

3

Tools – Phillips, 9/16” - ½” box wrench, ½” socket & ratchet (2 Allen wrenches included) 

Set-up tips - Open the shipping carton and remove the handle assembly only 
Cut engine end of carton and lay flat (work platform) 

Remove the bolts from the top of the 2 metal 

shipping

 stands, and raise engine end of unit to place   

wooden block under frame.  Wood is an assembly aid only.  Discard bolts and shipping stands.

Important …

Remove the tire retaining band LAST, after handle assembly 

Remove the black 3/8” bolt from the engine plate. 

Remove the 5/16” x 2 1/2” bolts from handle and use 

to attach handle to rear of engine plate, reinstalling 

the 3/8” top bolt. 

 But only finger tight.  Bolt 

needs to be fairly loose, until final adjustment.

Tighten the two bolts in front of each caster, 

into frame. 

 But only finger tight. Bolt needs to be 

fairly loose, until final adjustment.

Securing Clutch Cable 

Remove the 10-24 self-tapping screw from left side 

of handle; reinstall with clutch cable.   

Secure clutch cable on bottom of frame.  

Now tighten all the bolts in the correct order

.

Otherwise, you will have a heck of a time! 

1.

5/16” – By caster mount) 

2.

3/8” bolt on top of frame