13
•
Can I use the mini-g straight away without charging?
•
What are connector tips?
Connector tips are attachments to make the mini-g compatible
with various devices.
•
What if I can’t find the right tip?
Please refer to www.powertraveller.com - tips/adaptors. These are
updated on a regular basis.
•
Why does the mini-g auto shut down?
This can be for various reasons:
1. Device is fully charged.
2. The mini-g has run out of power and needs recharging.
3. A safety feature has been activated.
4. Your device is not drawing enough power from the mini-g.
•
My mini-g shuts down when charging my USB device.
This may happen when your device is only drawing a very small
amount of power and is not being detected by the mini-g. Select
the ‘88’ setting on the LCD screen to lock the USB on. Refer to
page 12.
•
Can I charge the mini-g via solar?
Yes, it is compatible with the 20V solargorilla (available separately).
FREQUENTLY ASKED QUESTIONS
•
If I accidentally left my mini-g turned on with no device
attached, how long would it stay on for?
It will automatically turn off after 1 minute.
•
My mini-g will not turn on. It shuts down when it still has
power left in it.
A safety feature may have been triggered. Connect the mini-g to
the AC electrical wall socket with the included AC mains charger
(6) for at least 10 seconds. This will reset the mini-g.
•
I’ve attached a device and the LCD screen is flashing and the
mini-g shuts down.
This happens when the device attached is drawing too much
power from the mini-g. Try using a lower power consumption
setting on your device or charging with the device turned off.
•
Can I use 2 or more mini-g’s to speed up the powering time of
my device?
Yes, from DC out (3) you can power from multiple mini-g chargers
with our Y or 4 way cable (available separately).
•
The DC out port turns off when my device is not fully charged.
This may happen when your device is only drawing a very small
amount of power and is not being seen by mini-g. Select the
correct DC voltage for your device. Press the on/off button (4)
twice in quick succession. The LCD screen will illuminate and stay
on until the mini-g is manually turned off. Refer to Permanent DC
on mode on page 12.
Yes, the mini-g comes 30% pre-charged and is ready to use
straight out the box. However, we do recommend full charging
the mini-g within 7 days of receiving it, and at least once every 4
months thereafter.
