Designed and developed in the UK
Engineered and made in China
Do not use with any other batteries apart from 12V vehicle batteries
Never use the manual over-ride feature to activate the
startmonkey400 on batteries which are not rated at 12V
If your vehicle will not start after it has been attached for up to 60
seconds and steps 2-4 have been repeated up to 7 times, leave
the startmonkey400 attached and retry after 10 minutes. If your
vehicle still will not start, please refer to your vehicle dealer
Do not remove the startmonkey400 if the green LED array is
illuminated. The unit must be turned off first – to do this, hold
the ON/OFF button for 3 seconds
Never let the crocodile clips come into contact with each other
unless the startmonkey400 has been turned off
If using the startmonkey400 to jump-start a marine outboard engine
please ensure the startmonkey400 has been manually turned off
before removing
If you require further information or assistance, please contact
technical support on +44 (0) 1420 542980
To check the capacity of your startmonkey400,
press the ON/OFF button for 1 second
To charge the startmonkey400 using the 16V
Universal AC Mains Charger, insert the output
cable into the DC IN socket and connect to
the mains
You can recharge the startmonkey400 using
Powertraveller’s powergorilla (not included).
Connect the L52D tip to the connection cable
(both supplied with powergorilla) and select the
16V setting on the powergorilla. Plug into the
DC IN on the startmonkey400
The array of green LED lights will scroll up
and increase as the startmonkey400 is being
charged. Once all the LEDs remain solid green,
the unit is fully charged
HOW TO RECHARGE THE STARTMONKEY400
Bedienungsanleitung bitte von unserer
webseite runterladen
Allez sur notre site internet afin de consulter
le mode d’emploi
Visitate il nostro website per scaricare le
istruzioni
Visita nuestra web para descargar el
manuel de usuario
Bezoek onze website om deze
gebruikershandleiding te downloaden
Other Powertraveller products can be purchased from
www.powertraveller.com
Customer support, email us at support@powertraveller.com
powertraveller.com/startmonkey400
POWERTRAVELLER LIMITED
Ceratech House, Omega Park,
Wilsom Road, Alton, Hampshire
GU34 2QE, UK
t +44 (0) 1420 542980
info@powertraveller.com
The 4 blocks of LEDs will indicate the amount
of capacity left. Each block represents 25% of
the battery’s capacity (Hint: If less than 50% we
recommend you charge the unit)
To charge the startmonkey400 using the 12V
in-car charger, insert the output cable into the
DC IN socket and insert the 12V DC plug into
the socket in your vehicle. A full charged will
take approximately 4 hours from 50%
YOU CAN
CHARGE:
+ MANY MORE
12V BATTERIES
STARTMONKEY400 IMPORTANT INFORMATION
SPECIFICATIONS:
• 7AH x 3 Lithium Polymer rechargeable battery
• Battery capacity: 21,000mAh
• Suitable for 12V batteries on vehicles with up to
1200 CCA
• Maximum jump-start current: 400A, 4,800 Watts
• Auto-on from 6V to 12V
• Working temperature: -27° to 50°C
• Weight: 1.1Kg
• Dimensions: 210 x 65 x 64 mm
All brands and trademarks belong to their respective owners.
