P2
POWERTRONIX Corporation
Page
2
of
10
INTRODUCTION
Thank you for your purchase of a POWERTRONIX Power Isolation Unit and congratulations on your
choice. The
Isolation Station
series of power isolation units is ideal for applications where medical and
dental devices require improved electrical isolation and/or reduced leakage current in order to comply
with existing safety standards, and where sensitive electronic systems require protection from electrical
power disturbances.
SAFETY SYMBOLS
Warning, dangerous
voltage
Alternating Current/AC
General warning sign
Direct Current/DC
Caution
Equipotentiality
Protective Earth
(Ground)
Earth (Ground)
Refer to Instruction
Manual/booklet
AND
“ON” and OFF (Power)
Indicator lights
GREEN, WHITE
& AMBER
Indicator lights
“Ready for Use”
INSPECTION
Remove the power isolation unit from the shipping container and inspect it for shipping damage.
Do not install or operate the product if it appears to be damaged in any way. If the unit is damaged, notify
the carrier, and the company that sold you the unit, IMMEDIATELY.
ENVIRONMENTAL ISSUES
This power isolation unit has environmental requirements similar to other electronic equipment. It
has been designed for indoor use only, in areas where it will not be exposed to excessive dust or
moisture. Make certain there is adequate airflow around the unit. Do not place objects on top of or near
the unit, which could obstruct the air vents.
This equipment may generate, use and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to other devices in the vicinity. If this
equipment does cause harmful interference to other devices, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures. However, there is no guarantee that interference will not occur in an installation.
